Bros Mole Trap with Alarm

An effective and easy-to-use trap for catching moles and voles.It allows you to capture the pest in its underground tunnel, and a special flag indicates that it has been caught.

Setting the trap:

1.Insert the lower end of the flag from the outside into the upper (larger) hole in the trap and bend it so that it extends out through the trap’s opening.
2.Place the trigger tab (the small, leaf-shaped piece) on the bottom end of the flag so that the surface of the flag and the tab are parallel to each other (in a straight line).Next, pull the end of the flag, along with the trigger tab attached to it, back into the trap and insert its end into the lower (smaller) hole in the trap.
3.After inserting the sleeve into the tunnel, the signal flag should be positioned perpendicular to the trap light.
4.Once inside the trap, the mole will move the trigger tongue located inside the trap and turn the flag parallel to the opening of the trap.

Usage:

1.Carefully uncover a section of the underground tunnel used by moles or voles.
2.Place the trap horizontally into the exposed trench, taking care to ensure that soil does not get into the trap or block the trench.The trap's latches (the metal plates at its ends) should be closed.
3.Cover the opening with sod, a board, or a flat object so that light and air cannot reach the tunnel.The signal should be visible above ground level.When it spins, it indicates that an animal has been caught in the trap.