Bros
Bros Magnetic Black Insect Screen for Doors, 100 x 220 cm
Innovative insect screen for doors
Thanks to the sewn-in magnets, it closes on its own every time the mesh is opened
Available in black and white, in two different sizes
The magnetic screen effectively protects the room from flying insects (flies, mosquitoes, moths, wasps).Magnets placed along its entire length ensure that whenever the screen is opened, both halves close automatically and securely..It can be used on all types of doors.It is exceptionally durable, available in black and white, and in two different sizes.
Note!If the mesh is significantly wrinkled, it can be ironed, but only through another piece of fabric.
Directions for use
1.After opening the door, clean the door frame (preferably with alcohol).
2.Peel off the protective paper from the outer edges of the strips and stick them to the top of the door frame: place one strip in the center of the frame, where the mesh panels meet, and the remaining strips at equal distances from each other, so that the outer strips extend about.1.5 cm beyond the edge of the door frame.
3.Leave it for about.2 h.
4.Peel off the protective paper from the adhesive tape inside the moldings.
5.Place the top parts of both grids inside the slats so that the pairs of magnets are exactly at the same height.
6.To ensure that the mesh fits snugly against the door frame, fold the mesh edging in half once and secure it inside the trim so that the folded section of the edging is completely hidden between the two parts of the trim.
7.Snap the slats into place.
8.Cut the curtain to the desired length and/or width.
9.Attach 6 pairs of Velcro strips to each of the two sections of the mesh, spacing them 25–30 cm apart along the vertical outer edge of the curtain.
10.Remove the protective paper from the undersides of the Velcro strips and use them to attach both parts of the mesh to the door frame.
If there are any traces of adhesive left after removing the mesh, they can be easily removed with cosmetic kerosene or extraction gasoline.
Thanks to the sewn-in magnets, it closes on its own every time the mesh is opened
Available in black and white, in two different sizes
The magnetic screen effectively protects the room from flying insects (flies, mosquitoes, moths, wasps).Magnets placed along its entire length ensure that whenever the screen is opened, both halves close automatically and securely..It can be used on all types of doors.It is exceptionally durable, available in black and white, and in two different sizes.
Note!If the mesh is significantly wrinkled, it can be ironed, but only through another piece of fabric.
Directions for use
1.After opening the door, clean the door frame (preferably with alcohol).
2.Peel off the protective paper from the outer edges of the strips and stick them to the top of the door frame: place one strip in the center of the frame, where the mesh panels meet, and the remaining strips at equal distances from each other, so that the outer strips extend about.1.5 cm beyond the edge of the door frame.
3.Leave it for about.2 h.
4.Peel off the protective paper from the adhesive tape inside the moldings.
5.Place the top parts of both grids inside the slats so that the pairs of magnets are exactly at the same height.
6.To ensure that the mesh fits snugly against the door frame, fold the mesh edging in half once and secure it inside the trim so that the folded section of the edging is completely hidden between the two parts of the trim.
7.Snap the slats into place.
8.Cut the curtain to the desired length and/or width.
9.Attach 6 pairs of Velcro strips to each of the two sections of the mesh, spacing them 25–30 cm apart along the vertical outer edge of the curtain.
10.Remove the protective paper from the undersides of the Velcro strips and use them to attach both parts of the mesh to the door frame.
If there are any traces of adhesive left after removing the mesh, they can be easily removed with cosmetic kerosene or extraction gasoline.
Write your opinion